Real Time Audio Editor Interview Questions and Answers PDF
• What Is Masking?The psychoacoustic phenonmenon that occurs when, for example, a loud cymbal crash and a softer fragment of human speech appear simultaneously in a mix, resulting in reduced intelligibility of the speech, is known as Masking.
• Which Is A Lossless Audio Format?
FLAC
• What Is Normalization?
After recording a number of digital audio soundfiles, the process used to ensure that the peak amplitude of each soundfile is maximized is called a Normalization
• A 1:1 Ratio Setting On A Compressor Would Yield
no change to the input
• The Best Way To Join Two Soundfiles Together So That There Is A Smooth Transition Without Silence Between The Sounds Is To Use.
An overlapping crossfade
• Which Type Of Microphone Requires Phantom Power?
Condenser
• What Does The Normalize Command Do To An Audio Track?
Raises the gain of the entire track to the point where the highest peak is just below clipping.
• What Is The Type Of Distortion That Occurs When A Digital Signal Is Recorded Too Loudly?
Digital clipping
• What Does Lfo Stand For?
Low Frequency Oscillator
• How Many Volts Is Phantom Power?
48
• What Is Panning?
Localizing a sound in within the perceived left-right stereo field requires the technique known as panning.
• Which Mp3 File Compression Rates Yields The Best Audio Fidelity?
320 mbps
• The Standard Sample Rate Specification For Cd Quality Audio Is?
44.1 kHz
• Daw Stands For?
Digital Audio Workstation
• Which Two Instruments Should You Keep In Mono In Order To Add More Punch And Focus To A Rock/pop Mix?
Bass and Kick Drums
• To Remove A Single Unwanted Frequency From A Digital Audio Signal, You Would Use:
A notch filter
• What Bit Depth Of Digital Audio File Is Better For Audio Processing ?
24 bit
• A Type Of Microphone Requiring Phantom Power Is A:
condenser microphone
• The Standard Soundfile Specification For Cd Quality Audio Is:
16-bit, 44.1 kHz sampling rate.
• What Is De-esser?
The signal processing plug-in used to reduce excess vocal siblance is called a De-esser.
• Imagine That You Are A Voiceover Actor/actress. What Is The Best Way To Achieve Professional Sound Quality For Your Vocal Performance?
Arrange microphones and set other equipment levels correctly so that the sound at the beginning of the recording chain is optimum.
• When Using A Compressor, The Ratio Setting (such As 4:1 Or 2:1) Will Control?
The amount of gain reduction applied when the input exceeds the threshold. The higher the ratio, the more compression is applied.
• In Order To Eliminate Or Minimize Clicks Between Soundfile Edits, You Should Try To Place Your Edits On?
A zero crossing point of the sound waves
• In The Majority Of Music Recording Situations, What Is The Most Critical Step In The Recording Chain.
Microphone placement
• Which Combinations Of Digital Recording Bit Resolution And Sampling Rate Will Yield The Best Audio Quality?
24 bit and 96 kHz
• When Using A Parametric Equalizer, The Q Setting Determines?
the width of the frequency band
• A Cardioid Microphone Pick Up Patterns Are Most Sensitive To Sound Produced On?
The front side of the microphone.
• When Recording, In Order To Minimize Distortion Caused By Digital Clipping, And To Maintain Consistent Signal Gain, It Is Best To Use?
An outboard compressor between the microphone signal and your audio interface.
• What Is The Correct Voltage On Phantom Power?
48 V
• What Is Comping?
editing multiple takes of a performance into a single take.
• Parallel Compression Is Achieved By:
Mixing an unprocessed 'dry', or lightly compressed signal with a heavily compressed version of the same signal.
No comments:
Post a Comment